/interface ethernet
set 0 name=Local
set 1 name=WAN1
set 2 name=WAN2
### Adding PPPoE Client connections for each WAN interface, Make sure to change it or add via GUI
/interface pppoe-client
add ac-name=”” add-default-route=no allow=pap,chap,mschap1,mschap2 dial-on-demand=no disabled=yes interface=WAN1 max-mru=1480 max-mtu=1480 mrru=disabled name=pppoe-out1 password=hahaha \
profile=default service-name=”” use-peer-dns=no user=user-1
add ac-name=”” add-default-route=no allow=pap,chap,mschap1,mschap2 dial-on-demand=no disabled=yes interface=WAN2 max-mru=1480 max-mtu=1480 mrru=disabled name=pppoe-out2 password=hahaha \
profile=default service-name=”” use-peer-dns=no user=user-2
### Starting the MANGLE MAGIC : ) PCC SCRIPTING START Here (Zaib)
/ip firewall mangle
add action=accept chain=prerouting disabled=no in-interface=pppoe-out1
add action=accept chain=prerouting disabled=no in-interface=pppoe-out2
add action=mark-connection chain=prerouting disabled=no dst-address-type=!local new-connection-mark=wan1_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/0 src-address=172.16.0.0/16
add action=mark-connection chain=prerouting disabled=no dst-address-type=!local new-connection-mark=wan2_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/1 src-address=172.16.0.0/16
add action=mark-routing chain=prerouting connection-mark=wan1_conn disabled=no new-routing-mark=to_wan1 passthrough=yes src-address=172.16.0.0/16
add action=mark-routing chain=prerouting connection-mark=wan2_conn disabled=no new-routing-mark=to_wan2 passthrough=yes src-address=172.16.0.0/16
### NATTING both WAN connection for PPPoE IP Pool users only
/ip firewall nat
add action=masquerade chain=srcnat disabled=no out-interface=pppoe-out1 src-address=172.16.0.0/16
add action=masquerade chain=srcnat disabled=no out-interface=pppoe-out2 src-address=172.16.0.0/16
### Setting Default Routes for MARKED packets for both WAN and for local router use. (zaib)
/ip route
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 routing-mark=to_wan1 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 routing-mark=to_wan2 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 scope=30 target-scope=10
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 scope=30 target-scope=10